Engineering/Civil Engineering [MCQS] Applied Mechanics Section -5 Sample Test,Sample questions

Question:
 
A point subjected to a number of forces will be in equilibrium, if

1.sum of resolved parts in any two directions at right angles, are both zero

2.algebraic sum of the forces is zero

3.two resolved parts in any two directions at right angles are equal

4. algebraic sum of the moments of the forces about the point is zero


Question:
 
The centre of gravity of a plane lamina will not be at its geometrical centre if it is a

1.circle

2.equilateral triangle

3.rectangle

4.square


Question:
 
The frequency of oscillation on moon as compared to that on earth, will be

1.2.44 times more

2.2.44 times less

3.3 times less

4.3 times more.


Question:
 
The velocity of a moving body, is

1.a vector quantity

2. a scalar quantity

3.a constant quantity

4.none of these.


Question:
  
A geo-stationary satellite is one which orbits the earth with a velocity of rotation of

1.moon

2.earth

3.sun

4.pole


Question:
  
A particle moving with a simple harmonic motion, attains its maximum velocity when it passes

1.the extreme point of the oscillation

2. through the mean position

3.through a point at half amplitude

4. none of these.


Question:
  
For a self-locking machine, the efficiency should be

1.less than 60%

2.50%

3.more than 50%

4.None of these.


Question:
  
From a solid cylinder of height 8 cm and radius 4 cm, a right circular cone is scooped out on the same base and having the same height as that of the cylinder. The c.g. of the remainder is at a height of

1.4.5 cm

2.5.0 cm

3. 5.25 cm

4.5.5 cm.


Question:
  
If a ball which is dropped from a height of 2.25 m on a smooth floor attains the height of bounce equal to 1.00 m, the coefficient of the restitution between the ball and floor, is

1.0.25

2.0.5

3.0.67

4.0.33


Question:
  
On a ladder resting on a rough ground and leaning against a smooth vertical wall, the force of friction acts

1. downwards at its upper end

2.upwards at its upper end

3.perpendicular to the wall at its upper end

4.zero at its upper end


Question:
  
Periodic time of body moving with simple harmonic motion, is

1. directly proportional to its angular velocity

2.directly porportional to the square of its angular velocity

3. inversly proportional to the square of its angular velocity

4.inversely proportional to its angular velocity.


Question:
A ball of mass 1 kg moving with a velocity of 2 m/sec collides a stationary ball of mass 2 kg and comes to rest after impact. The velocity of the second ball after impact will be

1.zero

2. 0.5 m/sec

3.1.0 m/sec

4.2.0 m/sec.


Question:
A particle is dropped from the top of a tower 60 m high and another is projected upwards from the foot of the tower to meet the first particle at a height of 15.9 m. The velocity of projection of the second particle is

1.16 m/sec

2.18 m/sec

3.20 m/sec

4.22 m/sec


Question:
A rigid body suspended Vertically at a point and oscillating with a small amplitude under the action of the force of gravity, is called

1.simple pendulum

2.compour pendulum

3. Second's pendulum

4.none of these.


Question:
Centre of gravity of a thin hollow cone lies on the axis of symmmetry at a height of

1.one-half of the total height above base

2.one-third of the total height above base

3.one-fourth of the total height above base

4.none of these.


Question:
If a body is acted upon by a number of coplaner non-concurrent forces, it may

1. rotate about itself without moving

2.move in any one direction rotating about itself

3.be completely at rest

4.all the above.


Question:
The centre of gravity of a homogenous body is the point at which the whole

1.volume of the body is assumed to be concentrated

2.area of the surface of the body is assumed to be concentrated

3.weight of the body is assumed to be concentrated

4.all the above.


Question:
Periodic time of a particle moving with simple harmonic motion is the time taken by the particle for

1.half oscillation

2.quarter oscillation

3.complete oscillation

4.none of these.


Question:
Pick up the correct statement from the following :

1.If two equal and perfectly elastic smooth spheres impinge directly, they interchange their velocities.

2.If a sphere impinges directly on an equal sphere which is at rest, then a fraction (1 - e2) the original kinetic energy is lost by the impact.

3. If a smooth sphere impinges on another sphere, which is at rest, the latter will move along the line of centres.

4.All the above.


Question:
Pick up the incorrect statement from the following. In a simple harmonic motion

1.velocity is maximum at its mean position

2.velocity is minimum at the end of the storke

3.acceleration is minimum at the end of the stroke

4.acceleration is zero at the mean position.


Question:
The Centre of gravity of a 10 x 15 x 5 cm T section from its bottom, is

1.7.5 cm

2.5.0 cm

3.8.75 cm

4.7.85 cm


Question:
The centre of gravity of a quadrant of a circle lies along its central radius at a distance of

1.0.2 R

2.0.3 R

3.0.4 R

4.0.5 R


Question:
The direction of projection should bisect the angle between the inclined plane and the vertical for a range of a projectile on inclined plane

1.to be zero

2.to be maximum

3.to be minimum

4. none of the these.


Question:
The gravitational force makes a satellite go round the earth in a circular orbit, if it is projected with an initial velocity of

1.8.04 km/sec at a height of 285 km

2.11.11 km/sec at a height of 37, 400 km

3.11.26 km/sec, the satellite escapes the pull of the earth

4.All the above.


Question:
The motion of a bicycle wheel is

1.translatory

2.rotary

3. rotary and translatory

4.curvilinear


Question:
The motion of a particle moving with S.H.M. from an extremity to the other, constitutes

1. half an oscillation

2.one full oscillation

3.two oscillations

4.none of these.


Question:
The piston of a steam engine moves with a simple harmonic motion. The crank rotates 120 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 0.5 metre from the centre, is

1. 5.88 m/sec

2.8.88 m/sec

3.10.88 m/sec

4.12.88 m/sec.


Question:
The point about which combined motion of rotation and translation of a rigid body takes place, is known as

1.Virtual centre

2.Instantaneous centre

3.Instantaneous axis

4.All the above.


Question:
The practical units of work, is

1.erg

2.joule

3.Newton

4.dyne.


Question:
The rate of change of displacement of a body with respect to its surrounding, is known

1.velocity

2.acceleration

3.speed

4.none of these.


Question:
The rotational velocity of a satellite is increased by 450 m per second if its launch is done from equator

1.eastward

2.northward

3.westward

4.southward


Question:
The velocity ratio of an inclined plane of inclination θ with horizontal for lifting a load is

1. sin θ

2.cos θ

3.tan θ

4.cosec θ.


Question:
Two parallel forces 20 kg and 15 kg act. In order that the distance of the resultant from 20 kg force may be the same as that of the former resultant was from 15 kg, the 20 kg force is diminished by

1. 5.5 kg

2.6.25 kg

3.8.75 kg

4. 10.5 kg.


Question:
When a body falls freely under gravitational force, it possesses

1.maximum weight

2.minimum weight

3.no weight

4.no effect on its weight.


Question:
When a body moves round a fixed axis, it has

1. a rotary motion

2.a circular motion

3.a translatory

4.a rotary motion and translatory motion.


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
  102. Hydraulic Machines MCQs Set-1
  103. Hydraulic Machines MCQs Set-2
  104. Hydraulic Machines MCQs Set-3
  105. Hydraulic Machines MCQs Set-4
  106. Basic Civil Engineering MCQ
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!