Biotechnology/Biotechnology MCQ set-3 Sample Test,Sample questions

Question:
 Which stone provides the calcareous component required for the manufacture of cement?

1.Lime

2.Limestone

3.Marble

4.Granite

Posted Date:-2022-07-07 06:01:19


Question:
A good brick should not absorb more than what percent of water when soaked?

1.15%

2.20%

3.30%

4.10%

Posted Date:-2022-07-07 06:22:38


Question:
A good brick when dropped from the height of 1 metre can:

1.Shatter

2.Not break

3.Break into 2 halves

4.Develop small cracks

Posted Date:-2022-07-07 06:23:53


Question:
After how many days is the strength of cement is tested and graded according to the result?

1.7 days

2. 28 days

3.1 day

4.14 days

Posted Date:-2022-07-07 06:07:29


Question:
Excess of oxides of iron makes the brick:

1.Red in colour

2.Black in colour

3.Dark blue in colour

4.Yellow in colour

Posted Date:-2022-07-07 06:12:59


Question:
Grade 43 OPC is used widely for:

1.High rise buildings

2.Plastering

3.House construction

4.Finishing works

Posted Date:-2022-07-07 06:07:01


Question:
Grade 43 OPC shall be rejected if it remains in bulk storage in the factory for:

1.More than 3 months

2. More than 1 month

3.More than 6 months

4.More than 4 months

Posted Date:-2022-07-07 06:08:03


Question:
How is the argillaceous material used in the manufacture of cement stored?

1.Silos

2.Basins

3.Bags

4.Storage tanks

Posted Date:-2022-07-07 05:58:28


Question:
How many constituents are there in the brick earth?

1.5

2.4

3.6

4. 8

Posted Date:-2022-07-07 06:11:34


Question:
How many major ingredients are present in the composition of cement?

1.8

2.5

3.10

4.6

Posted Date:-2022-07-07 05:53:00


Question:
How many methods of moulding brick earth are there?

1.3

2.5

3.2

4.4

Posted Date:-2022-07-07 06:19:37


Question:
How many types of cement are there based on the ability to set in presence of water?

1.2

2.3

3.4

4.5

Posted Date:-2022-07-07 06:03:23


Question:
How many types of the brick earth are there?

1.3

2.5

3.2

4.6

Posted Date:-2022-07-07 06:15:59


Question:
How much does a bag of cement weigh?

1.1 kg

2.25 kg

3.50 kg

4.35 kg

Posted Date:-2022-07-07 05:59:23


Question:
How much maximum percentage by mass of performance improvers can be added in grade 33 OPC?

1.0.5

2. 1

3.5

4.0.1

Posted Date:-2022-07-07 06:09:38


Question:
In the same figure in question 2, what is ‘b’ and its function?

1.Water-plasticity

2.Lime-strength

3.Sulphur-soundness

4.Gypsum-control setting

Posted Date:-2022-07-07 05:58:02


Question:
In what form should lime be present in the brick earth?

1.Paste

2.Lump

3.Clinker

4.Powder

Posted Date:-2022-07-07 06:12:29


Question:
Loamy, mild or sandy clay has __________ percentage of alkali?

1.5%

2.1%

3.4%

4.0%

Posted Date:-2022-07-07 06:16:25


Question:
Ordinary Portland cement (OPC) has been classified into how many grades?

1.2

2.3

3.10

4.5

Posted Date:-2022-07-07 06:06:32


Question:
Sulphur in cement is present in what amount?

1.0.5 – 6 g

2.1 – 2.5%

3.0.5 – 6%

4.1 – 2.5g

Posted Date:-2022-07-07 05:57:06


Question:
The depression provided in the face of a brick during its manufacturing is called:

1.Frog

2.Furrow

3.Groove

4.Scallop

Posted Date:-2022-07-07 06:21:26


Question:
The meaning of slop moulded bricks is:

1.Sand sprinkled inside mould

2.Insufficiently moulded bricks

3.Brittle and slimy bricks

4.Mould dipped in water

Posted Date:-2022-07-07 06:20:09


Question:
The presence of which of the below renders clay totally unsuitable for brick manufacture?

1.Kallar

2.Kankar

3. Hay

4.Lime

Posted Date:-2022-07-07 06:15:34


Question:
The process of kneading brick earth is called:

1.Pugging

2.Blending

3.Ramming

4.Tamping

Posted Date:-2022-07-07 06:18:22


Question:
The ratio of percentage of alumina to iron oxide in OPC 43 grade is:

1.3.5

2.0.66

3.0.1

4.0.05

Posted Date:-2022-07-07 06:08:30


Question:
Water proof cement is prepared by mixing ordinary cement with:

1.Resins

2.Water repellent chemicals

3.Sulpho-aminate

4.Metal stearates

Posted Date:-2022-07-07 06:05:49


Question:
What function does iron oxide perform in cement?

1.Increases strength

2.Makes cement sound

3.Increases setting time

4.Acts as flux

Posted Date:-2022-07-07 05:52:35


Question:
What happens to raw bricks if an excess of alumina is present?

1.Becomes hard

2.Becomes brittle

3.Decay

4.Shrinkage

Posted Date:-2022-07-07 06:13:26


Question:
What is the abbreviation of PPC?

1.Perfect Portland Cement

2.Portland Produced Cement

3.Portland Pozzolana Cement

4.Productive Portland Cement

Posted Date:-2022-07-07 06:02:26


Question:
What is the advantage of using precalciner?

1.Fine grained cement

2. Larger clinker size

3.Fuel efficiency

4.Sound cement

Posted Date:-2022-07-07 06:00:53


Question:
What is the harmful effect of presents of alkali in brick earth on bricks?

1.Discolourises bricks

2.Efflorescence

3.Porous bricks

4.Flaking

Posted Date:-2022-07-07 06:13:56


Question:
What is the recommended size of a brick?

1.20x10x10cm

2.20x9x9cm

3.19x9x9cm

4.19x8x8cm

Posted Date:-2022-07-07 06:22:15


Question:
What property does air-entraining cement provide?

1.Workability

2.Soundness

3.Fineness

4.Strength

Posted Date:-2022-07-07 06:03:49


Question:
Which is the most commonly employed drying method in India?

1.Hot floor drier

2.Tunnel drier

3.Natural drying

4.Blow drying

Posted Date:-2022-07-07 06:20:33


Question:
Which of the below is used to sound proof bricks?

1.Gypsum

2.Terracotta

3.Plastics

4.Ceramic

Posted Date:-2022-07-07 06:23:25


Question:
Which of the following bricks is not preferred?

1.Sharp-edged

2.Clamp burned

3.Sound-proofed

4.Kiln burned

Posted Date:-2022-07-07 06:23:03


Question:
Which of the following cannot be added in 33 grade OPC after burning stage?

1.Gypsum

2.Water

3.Colouring Agents

4.Clay

Posted Date:-2022-07-07 06:09:04


Question:
Which of the following is not a chemical change that takes place in the brick earth during burning?

1.Dehydration

2.Vitrification

3.Oxidation

4.Reduction

Posted Date:-2022-07-07 06:20:59


Question:
Which of the following is not a pozzolanic material?

1.Fly ash

2. Silica fume

3.Cinder

4.Slag

Posted Date:-2022-07-07 06:05:22


Question:
Which of the following is not an advantage of rapid hardening cement?

1.Faster construction

2.Short curing period

3.Light in weight

4.Higher final setting time

Posted Date:-2022-07-07 06:02:54


Question:
Which of the following leads to the formation of small pores in brick?

1.Iron pyrites

2.Pebbles

3.Organic matter

4.Alkalis

Posted Date:-2022-07-07 06:15:06


Question:
Which of the following types of cement is used in marine structures?

1.Expanding cement

2.High alumina cement

3.Blast furnace slag cement

4.White cement

Posted Date:-2022-07-07 06:04:21


Question:
Which one of the below is not a feature of cement Kiln?

1.Employs alternate fuels

2.Natural alkaline environment

3.High temperature

4.Portable

Posted Date:-2022-07-07 06:01:46


Question:
Which one of the below is rarely used as fuel in burning stage of wet process of cement manufacturing?

1.Wood

2.Gas

3.Pulverised coal

4.Fuel oil

Posted Date:-2022-07-07 05:58:56


Question:
Which one of the below is the first step in the preparation of brick earth process?

1.Digging

2.Site selection

3.Cleaning

4.Unsoiling

Posted Date:-2022-07-07 06:17:23


Question:
Which one of the below is the most important ingredient in the brick earth?

1.Alumina

2.Lime

3.Silica

4.Magnesia

Posted Date:-2022-07-07 06:12:02


Question:
Which one of the following is not a part of pug mill?

1.Vertical shaft

2.Hub

3.Cutting blades

4.Timber base

Posted Date:-2022-07-07 06:19:14


Question:
Which pair of the compound and coloured cement mentioned below is wrong?

1.Iron oxide-yellow

2.Cobalt-black

3.Chromium oxide-green

4.Manganese dioxide-brown

Posted Date:-2022-07-07 06:04:56


Question:
Why do bricks become brittle when excess silica is present?

1.Pores are created

2.Flaking occurs

3.Thermal stability is lost

4.Cohesion is lost

Posted Date:-2022-07-07 06:14:28


Question:
Why is the process of weathering performed?

1.To remove organic matter

2.To prepare for next process

3.To improve plasticity

4.To dry clay

Posted Date:-2022-07-07 06:17:57


More MCQS

  1. Biotechnology MCQ set-1
  2. Biotechnology MCQ set-2
  3. Biotechnology MCQ set-3
  4. Biotechnology MCQ set-4
  5. Biotechnology MCQ set-5
  6. Biotechnology MCQ QUESTIONS AND ANSWER
  7. Biotechnology & its Applications:MCQ QUESTIONS AND ANSWER
  8. Biotechnology MCQ QUESTION AND ANSWER
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!