Yes, there is. A feature known as filename expansion allows you do this using the TAB key. For example, if you have a path named /home/iceman/assignments directory, you would type as follows: /ho[tab]/ice[tab]/assi[tab] . This, however, assumes that the path is unique and that the shell you're using supports this feature.
Posted Date:- 2021-08-26 07:13:00
This empty directory name serves as the nameless base of the Linux file system. This serves as an attachment for all other directories, files, drives, and devices.
Posted Date:- 2021-08-26 07:11:26
Any filename can have a maximum of 255 characters. This limit does not include the path name, so therefore the entire pathname and filename could well exceed 255 characters.
Posted Date:- 2021-08-26 07:09:47
Linux assigns numbers at the end of the drive identifier. For example, if the first IDE hard drive had three primary partitions, they would be named/numbered, /dev/hda1, /dev/hda2 and /dev/hda3.
Posted Date:- 2021-08-26 07:08:18
Whereas under Windows you refer to the parallel port as the LPT port, under Linux you refer to it as /dev/lp . LPT1, LPT2 and LPT3 would therefore be referred to as /dev/lp0, /dev/lp1, or /dev/lp2 under Linux.
Posted Date:- 2021-08-26 07:07:38
netstat command gives various information about the network and routing tables, interface statics and more about the system.
Posted Date:- 2021-08-26 07:06:54
To change the default run level in Linux use the init command.
Posted Date:- 2021-08-26 07:06:02
Follow these steps to copy files to a Floppy Disk safely:
1. Mount the floppy disk
2. Copy the files
3. Unmount the floppy disk
If you donâ€™t unmount the floppy disk, then the data might become corrupted.
Posted Date:- 2021-08-26 07:05:13
You can use the cp command to copy a file in Linux. The general syntax is:
$ cp <source> <destination>
Suppose you want to copy a file named questions.txt from the directory /new/linux to /linux/interview, then the command will be:
$ cp questions.txt /new/linux /linux/interview
Posted Date:- 2021-08-26 07:03:32
Network Bonding is a process of combining more than two network interfaces to form a single network interface. It offers performance improvement and redundancy by increasing network throughput and bandwidth.
No need to worry if one interface is down or unplugged because the other will work. The behaviour of the bonded interface depends on the bonding method.
Posted Date:- 2021-08-26 07:02:40
In Linux, there are many file systems:
Ext, Ext2, Ext3, Ext4, JFS, XFS, btrfs, ufs, autofs, devpts, ntfs and swap.
Posted Date:- 2021-08-26 07:02:01
The directory name is lib/modules/kernel-version/, this is the directory where we can see the Kernel module, this stores all the valuable information about the compiled drivers. Using lsmod command users can see the installed kernel modules.
Posted Date:- 2021-08-26 06:58:11
Umask = users for file creation mode. When you create the file, this offers the default file access permissions. Umask also specify a new restriction to the newly created file type.
Posted Date:- 2021-08-26 06:57:38
LVM means large volume management; it is nothing but a storage management device. With the help of LVM users can create, resize, or delete the partitions. LVM also increases the abstraction, flexibility, control, gather existing storage device, and allocates the logical units.
Posted Date:- 2021-08-26 06:56:50
The Linux file system is used to store and handle the data. Without a file system, it becomes a very difficult task to know where the file begins from and where the file ends.
Posted Date:- 2021-08-26 06:56:05
Yes, it works on Linux; we can use this key combination to restart the system.
Posted Date:- 2021-08-26 06:54:21
Zombie is a process state when the child dies before the parent process. In this case the structural information of the process is still in the process table. Since this process is not alive, it cannot react to signals. Zombie state can finish when the parent dies. All resources of the zombie state process are cleared by the kernel.
Posted Date:- 2021-08-26 06:53:46
Bash is a free shell for UNIX. It is the default shell for most UNIX systems. It has a combination of the C and Korn shell features. Bash shell is not portable. any Bash-specific feature will not function on a system using the Bourne shell or one of its replacements, unless bash is installed as a secondary shell and the script begins with #!/bin/bash. It supports regular and expressions. When bash script starts, it executes commands of different scripts.
Posted Date:- 2021-08-26 06:53:07
The preferred size for a swap partition is twice the amount of physical memory available on the system. If this is not possible, then the minimum size should be the same as the amount of memory installed.
Posted Date:- 2021-08-26 06:50:06
One file can be appended to another file by using the command cat file 2 >> file 1. The operator â€œ>>â€ appends the output of the named file or creates the file if it is not created. There is another command cat file 1 file 2 > file 3 which appends two or more files to one.
Posted Date:- 2021-08-26 06:49:28
A Microprocessor is a device that executes instructions. It is a single-chip device that fetches the instruction from the memory, decodes it and executes it. A Microprocessor can carry out 3 basic functions:
a) Mathematical operations like addition, subtraction, multiplication, and division
b) Move data from one memory location to another
c) Make decisions based on conditions and jump to new different instructions based on the decision.
Posted Date:- 2021-08-26 06:48:07
A Latch is a temporary storage device controlled by timing signal which can either store 0 or 1. A Latch has two stable states (high-output or 1, and low-output or 0) and is mainly used to store state information. A Latch can store one bit of data as long as it is powered on.
Posted Date:- 2021-08-26 06:47:19
Yes , it is absolutely legal to edit Linux Kernel. Kernel is released under General Public License(GPL) , and anyone can edit Linux Kernel to the extent permitted under GPL. Linux Kernel comes under the category of Free and Open Source Software(FOSS).
Posted Date:- 2021-08-26 06:45:52
A pipe is a form of redirection used in Linux. It is used in combining more than two commands and the output of one command can take as input to the next command.
Posted Date:- 2021-08-26 06:45:01
The cat command in Linux is used for concatenating and printing the files. Users apply cat command to check the contents of the dependencies file or to confirm the version of an application which is already built locally.
$ cat requirements.txt
Posted Date:- 2021-08-26 06:44:35
A daemon is a computer program that runs as a background process to provide functions that might not be available in the base Operating System. Daemons are usually used to run services in the background without directly being in control of interactive users. The purpose of Daemons are to handle periodic requests and then forward the requests to appropriate programs for execution.
Posted Date:- 2021-08-26 06:40:50
There are 3 modes of vi editor:
1. Regular/Command mode: Lets you view the content
2. Insertion/edit mode: Lets you delete or insert content
3. Replacement mode: Lets you overwrite content
Posted Date:- 2021-08-26 06:40:21
A hard link is another name for an existing file on Linux. We can create so many numbers of hard links, for any file. They can create links for other hard links.
Posted Date:- 2021-08-26 06:39:36
It will be redirected to another file using its path. Target files do not contain any data. Symbolic links redirect to another entry somewhere in the file system. If the target file is deleted, the link to that file is removed, but not the file.
Posted Date:- 2021-08-26 06:39:03
There are 5 main Directory Commands in Linux:
Posted Date:- 2021-08-26 06:36:54
inode is the unique name given by the operating system to each file. Similarly, process id is the unique id given to each process.
Posted Date:- 2021-08-26 06:36:20
They are dynamic values that affect the process of programs on a computer. They exist in every operating system and their types may vary. They can be created, edited, saved, and deleted and they also give information about the system behaviour.
Posted Date:- 2021-08-26 06:33:27
To change permissions in linux , we need to understand the concept of binary assignment.
Each permission within a permission group is assigned a binary representation.
Read - 4 ( 100 )
Write - 2 (010)
Execute - 1 (001)
For example, if we wanted to give the owner â€˜rwxâ€™ , ownerâ€™s group â€˜r-xâ€™ and others â€˜r--â€™ permissions will be summed up to give the permission i.e for owner- r + w + x = 4 + 2 + 1 = 7 , for ownerâ€™s group r + x = 4+1=5 , and for others = r = 2.
So, the permission will be â€œ752â€.
Now coming to the question , an admin or an owner can change the permissions of a file using the â€œchmodâ€ command line utility.
Syntax of the chmod command is of the form:
chmod <file-permission> file-name.
So for bringing the permissions of the above example into effect ,we can use the command chmod 752 file.txt
Posted Date:- 2021-08-26 06:32:59
pwd: The command stands for â€œprint working directoryâ€. It is a built-in command which displays the current working location, working path that starts with / and directory of the user. It displays the full path of the current directory.
ls: The command is used for listing all the files in the directed folder.
cd: The command stands for â€œchange directoryâ€. It is used for changing the directory on which you want to work from the present directory. To access a particular directory type cd followed by the directory name.
mkdir: The command is used for creating a new directory.
rmdir: The command is used for removing a directory from the system.
Posted Date:- 2021-08-26 06:31:49
Ans: The grep searches file patterns. The grep searches the relevant lines for a specific pattern in the output of another command.
$ cat tomcat.log | grep org.apache.catalina.startup.Catalina.start
12-Jan-2018 17:08:35.542 INFO [main] org.apache.catalina.startup.Catalina.start Server startup in 681 ms
Posted Date:- 2021-08-26 06:30:58
Disadvantages of Open Source Operating System mentioned below
1. Difficulty of use
2. Compatibility Issues
3. Liabilities and warranties
4. Hidden costs
Posted Date:- 2021-08-26 06:28:19
You can use any of the following commands:
1. free -m
Posted Date:- 2021-08-26 06:25:21
Linux was one of the first open-source technologies, many programmers added software that completely open to the users, which means you can download the file and change the code as you like. It has a wide range of options for users and increased security.
Posted Date:- 2021-08-26 06:24:28
The key differences between the BASH and DOS console lie in 3 areas:
- BASH commands are case sensitive while DOS commands are not;
- Under BASH, / character is a directory separator and acts as an escape character. Under DOS, / serves as a command argument delimiter and is the directory separator
- DOS follows a convention in naming files, which is 8 character file name followed by a dot and 3 characters for the extension. BASH follows no such convention.
Posted Date:- 2021-08-26 06:23:42
The basic components of Linux are:
a) Kernel: It is the core component of the Operating System that manages operations and hardware.
b) Shell: Shell is a Linux interpreter which is used to execute commands.
c) GUI: GUI stands for Graphical User Interface which is another way for a user to interact with the system. But unlike CLI, GUI consists of Images, Buttons, TextBoxes for interaction.
d) System Utilities: These are the software functions that allows the user to manage the computer.
e) Application Programs: Software programs or set of functions designed to accomplish a specific task.
Posted Date:- 2021-08-26 06:22:43
Open source allows you to distribute your software, including source codes freely to anyone who is interested. People would then be able to add features and even debug and correct errors that are in the source code. They can even make it run better and then redistribute these enhanced source code freely again. This eventually benefits everyone in the community.
Posted Date:- 2021-08-26 06:21:30
Swap space is a certain amount of space used by Linux to temporarily hold some programs that are running concurrently. This happens when RAM does not have enough memory to hold all programs that are executing.
Posted Date:- 2021-08-26 06:21:07
Each file or directory has three permissions in Linux.
1. Read: It refers only to read the file.
2. Write: It refers to write the file or can modify the file of a directory.
3. Execute: It affects the userâ€™s capability to execute the file or to view the file of a directory.
Posted Date:- 2021-08-26 06:20:23
The kernel is the core source of the Linux operating system.
Posted Date:- 2021-08-26 06:19:40
The ps (i.e., process status) command is used to provide information about the currently running processes, including their process identification numbers(PIDs).
A process, also referred to as a task, is an executing (i.e., running) instance of a program. Every process is assigned a unique PID by the system.The basic syntax of ps is - ps [options]
Posted Date:- 2021-08-26 06:19:08
A linux process can be in any one of the following process states:
1. Running: Process is either running or ready to run.
2. Interruptible: a Blocked state of a process and waiting for an event or signal from another process.
3. Uninterruptible: a blocked state. Process waits for a hardware condition and cannot handle any signal.
4. Stopped: Process is stopped or halted and can be restarted by some other process.
5. Zombie: process terminated, but information is still there in the process table.
Posted Date:- 2021-08-26 06:18:31
Bash is a Unix shell and command processor written by Brian Fox for the GNU project. It is free software and acts as a replacement for Bourne Shell. It is an interpreted and not compiled process which can also be run in the terminal window.
This allows users to write commands and cause actions. Bash is capable of reading commands from shell scripts.
Posted Date:- 2021-08-26 06:17:21
Linux kernel is the heart of the operating system. It acts as a bridge between software and hardware. If Software requests the hardware, then the kernel delivers the data between software and hardware.
For example, if you want to play a song you should launch your default player, it requests the kernel to play a song, now the kernel will contact the hardware to seek the permissions or to seek the hardware components like if you plugged in any headset to the device. Most Android phones use Linux kernels.
Posted Date:- 2021-08-26 06:17:00
Linus Torvalds created Linux. Linus Torvalds was a student at the University of Helsinki, Finland in 1991. He started writing code on his own to get the academic version of Unix for free. Later on, it became popular as Linux Kernel.
Posted Date:- 2021-08-26 06:16:05
Linux is an Open-Source Operating System based on Unix. Linux was first introduced by Linus Torvalds. The main purpose of Linux was to provide free and low-cost Operating System for users who could not afford Operating Systems like Windows or iOS or Unix.
Posted Date:- 2021-08-26 06:15:02