What is the recommended way to fix the registry description for the printer driver

  1. Home

- Online Exam Test Papers | - MCQs[multiple choice questions and answers ] | - Mock Test Papers | - Practice Papers | - Sample Test Papers |

Question:
What is the recommended way to fix the registry description for the printer driver

1.Delete the spool file

2.Run regedit.exe and remove any reference to the printers

3.Run sysedit.exe and remove any reference to the printers

4.Remove the printer driver and re¬install it

Posted Date:-2021-02-20 12:33:54

More MCQS Questions and answers

  1. What action will correct patchy, faint, uneven or intermittent print on a dot matrix printer?
  2. What is your first action when windows reports that your hard drive is developing bad sectors?
  3. A customer calls and says her computer won't boot, she can hear noises and can see lights on the box, but nothing comes up on the screen, what should you take to the site to fix the problem?
  4. If the voltage on pin 1 of the power supply is not in the range of _____ volts, the PC will not boot.
  5. Which component must be vacuumed or replaced during preventative maintenance on a laser printer?
  6. A capacitor is measured in which of the following units?
  7. A parity error usually indicates a problem with
  8. A PC with a 486DX2 processor runs internally at 50Mhz. What speed would its external logic be running?
  9. A wrist grounding strap contains which of the following:
  10. An important first step in troubleshooting which component in a laser printer is causing a jam is to:
  11. Dust in a computer actually increases the size of the magnetic fields inside it. This is not good, so you must occasionaiy dust, I trust. What's the best way to do this?
  12. ESD potential decreases with the use of:
  13. Every video card must have?
  14. How is ink transferred to paper in common ink jet printers?
  15. How many DMA channels are there in an AT class PC?
  16. How many IRQs does a chain of USB devices require?
  17. IDE cables have how many pins?
  18. In inkjet printers, what is the most common problem with the paper tray?
  19. In laser technology, what happens during the transfer stage?
  20. On a dot-matrix printer, regular lube maintenance should be followed, but this component should never be lubed
  21. On a leased line installation a known good external modem shows no carrier detect light. Where is the problem most likely to be?
  22. One of the major components of a PC is the Central Processing Unit (CPU) which can be best described as:
  23. Resistance is measured in units of:
  24. Static electricity thrives is which type of environment?
  25. The buffers statement is found in what file?
  26. The digital multimeter is set for DC, Ohm and 20k. You will read _____ while measuring a good 2 amp fuse.
  27. The following process determines the amount of memory present, the date/ time, and which communications ports and display adapters are installed in a microcomputer?
  28. The following process determines the amount of memory present, the date/ time, and which communications ports and display adapters are installed in a microcomputer?
  29. The monitor power LED is 'on' but the monitor screen is completely dark. The least likely cause of the problem is:
  30. What are the most likely conditions for ESD?
  31. What configuration should a Volt-Ohm meter he set to when testing a fuse?
  32. What IRQ is used for COM 2?
  33. What is the i/o address for com1?
  34. What is the i/o address for com3?
  35. What is the recommended way to fix the registry description for the printer driver
  36. What is the size of the reserved memory area?
  37. What should you replace if the brightness or contrast adjustments were malfunctioning on a laptop?
  38. What voltage does a 586 system use?
  39. Which controller would support an external CD-ROM drive?
  40. Which device uses a DMA channel?
  41. Which of the following items would require you t.o comply with EPA disposal guidelines?
  42. Which of the following statements is true?
  43. Which provides the fastest data access time?
  44. Which REQUIRES an anti-static bag for transport?
  45. Which would you have to upgrade to install an EIDE drive?
  46. With a dot matrix printer, light then dark print is most commonly caused by:
  47. You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!